If you have any questions about this equipment, write to us and our manager will be happy to answer you!
Plate milk cooler OMP -1
Plate-type milk coolers OMP 1 are designed for pre-cooling milk on cattle farms, as part of milking installations with a milk line or separately. As a source of cold water, we offer the UVN-6-1.8 water-cooling installation. It is recommended to use reservoirs of coolers of any type for collecting, further to cooling, and storing milk.
The cooler is a set of plates with a special profile, separated by rubber gaskets. The plates are made of stainless steel. The profile of the plates is selected in such a way that, on the one hand, a cavity forms along which the milk passes, and on the other hand, cooling water. The movement of milk and water flows towards each other.
A distinctive feature of the OMP-1 coolers is the glueless connection of gaskets with plates.
Specifications:
| No. p / p | Denomination of the indicator | Indicator value |
| Пропускная способность, не менее дм/ч | 1000 | |
| The temperature of the milk entering the cooler, not more than, C | 35 | |
| The temperature of the cooling water entering the cooler, C | 2+1 | |
| Chilled milk temperature, С | 3 ° C higher than cooling water temperature | |
| Inlet cooling water consumption, not more, dm / h | 3000 | |
| Maximum working pressure in the milk and water cavities, MPa (kg / cm) | 0,25 (2,4) | |
| Diameter of connecting branch pipes (external), mm | 22 | |
| The number of plates, pieces. | 16 | |
| Cooler mass, kg | 42 | |
| Overall dimensions of a cooler, no more than, mm | 450х180х646 |
